[Valery W]

Список обновлений ArchiCAD 16.

ArchiCAD 16 Hotfix 5 (Build 4010)

Скачать обновление №5 (4010)

• Windows 32-bit
• Windows 64-bit
• Mac

Предыдущие обновления

Извините, вам запрещён просмотр содержимого спойлеров.

[GAG]

ArchiCAD 16 Hotfix 1 (Build 3014)

Исправлено

• 143258, 143075,143690   CRASH: ArchiCAD 16 could crash if two or more ArchiCAD instances were running
• 144458   EDIT: Volume of zones didn't change in the zone stamp after applying the Crop Zone command
• 144281   EDIT: Changing the "Reduce by" value in the Area Calculation tab of Zone
  Selection Settings and Updating Zones didn't change the calculated value
   automatically
• 144221   EDIT: Zone didn't get updated after placing a zone boundary line across the zone
• 144255    EDIT: Layer visibility could change after zooming or panning in certain circumstances

Скачать

• Windows 32-bit (all languages) 
• Windows 64-bit (all languages) 
• Mac (all languages)
  

[GAG]

ArchiCAD 16 Hotfix 2 (Build 3270)

Исправлено

• 144420   CRASH: Deleting a dimensioned point of a polyline could crash ArchiCAD.
• 143903   DATA LOSS: Data of Roof elements could go Invalid with particular file.
• 144968   DOCUMENT: Symbolic and Cut Plane display of custom Curtain Wall panels was different.
• 144627   EDIT: While using the Bulge function the segmentation of the feedback and the resulting Morph was different. 
• 143105   EDIT: 3D openings could only be placed to the left side of the first input click.
• 144515   EDIT: If a view is traced below another, hiding the layer of a selected
  element and switching to Reference view made the cursor flash.
• 144962   EDIT: In Curtain Wall Edit mode the Element ID Manager showed attributes
  without showing the hierarchy of elements and sub elements.
• 144254   EDIT: In special circumstances the look of Library objects were not regenerated after changing their parameters.
• 144085   EDIT: Mouse scrolling could change Renovation status back to existing if Trace reference was on
• 144284   EDIT: On floorplan using tracker's x-y coordinates for placing a Door or a
  Window in a wall resulted in a bad position within the wall.
• 143097   EDIT: On HiDPI displays 2D and 3D windows didn't exploit the higher resolution.
• 143069   EDIT: On HiDPI displays pop-up palette icons were wrong.
• 144794   EDIT: In MAC OS X 10.8 dotted lines were not visible.
• 107293   EDIT: In Windows if the DPI of the display was set to 125% then tooltips were unusable.
• 144641   EDIT: Turning off the Show Skin Separator Lines option made turning it on again difficult. 
• 143466   EDIT: With particular files 3D preview could be missing when editing morphs.
• 142799   ENERGY EVALUATION: Changing the Mechanical Cooling type between Air Cooled and
   Water Cooled values didn't affect the values of Auxiliary systems. 
• 142829   ENERGY EVALUATION: Ecodesigner could take another material than the one had selected in the material catalogue. 
• 143032   ENERGY EVALUATION: Empty Windows/Doors did not appear as Uncovered Area.
• 142815   ENERGY EVALUATION: Glazing selection set wrong Opaque U value.
• 142880   ENERGY EVALUATION: Heat Pump for Cooling Source didn't have any effect on the result.
• 144094   ENERGY EVALUATION: Project Location and Climate data contained different
  locations after "Start Energy Simulation" in the AUS ArchiCAD.
• 143949   ENERGY EVALUATION: Some zones could be erroneously shown as outdated.
• 143931   ENERGY EVALUATION: The text explaining the CO2 emission graphics was erroneously positioned.
• 142737   ENERGY EVALUATION: Total area sorting didn't work on OpeningsTabPage.
• 142820   ENERGY EVALUATION: With migrated projects small infiltration could appear even though all shell elements were airtight.
• 144967   FILE/IFC: After exporting IFC file containing openings with casing from ArchiCAD
  then importing the IFC file again into ArchiCAD the opening size could
  become bigger.
• 145188   FILE/IFC: Classification Reference values couldn't be chosen.
• 144637   FILE/IFC: Empty openings originated from migrated files got exported to IFC with erroneous geometry.
• 144093   FILE/IFC: GrossWallArea and NetWallArea were exported incorrectly into IFC.
• 143209   FILE/IFC: Exported IFC file geometry of slanted reveals was incorrect.
• 143035   FILE/IFC: Exported IFC files had the time stamp the wrong format.
• 135950   FILE/IFC: Particular Curtain Wall elements could go be missing missing in IFC exports.
• 127256   FILE/IFC: Older IFC translators could not be used after importing them in ArchiCAD 16
• 144955   FILE/IFC: Update with IFC command did not update Zone number and name with particular files.
• 142912   FILE/IFC: Wall holes were exported with erroneous geometry in certain circumstances.
• 144496   FILE/IFC: With particular project the exported value for IfcBuildingLocalplacement was wrong.
• 143151    LIBRARY/MODEL : GDL's script created from morphs could get wrong line
  endings which made these object unusable on the BIMComponents site.
• 143217   LIBRARY/MODEL: Object-Morph-Object round trip could produce macro errors.
• 144568   LIBRARY: Downloading two objects using the same macro from the BIMcomponents
  site caused the macro to be placed twice in the embedded library.
• 142444   MODEL: Changing the ID of a Curtain Wall component made the component disappear.
• 143104   MODEL: Holes in beams could not be deleted.
• 143103   MODEL: Holes in beams could not be elevated.
• 143764   MODEL: Hotlink Module could move to a different story after breaking a copy of the original one and resaving it.
• 143130   MODEL: In particular circumstances in the Project map some floors could get duplicated.
• 144077   MODEL: OpenGL shadows could get lost completely in case of particular files on Mac OS X 10.6.
• 144267     MODEL: Particular Composite structure got invalid skins after appending it through attribute manager.
• 144922    MODEL: For Mac OS X 10.8 antializing feature has been re-enabled on Mac
  Graphics drivers that have been tested by Graphisoft. For more
  information go here. 
• 145144   SPEED: Stretching a polyline could cause slowdown in case of particular files
• 130395   SPEED: To Room and From Room parameters of Zones were unnecessarily
  recalculated after zooming or panning causing slow navigation with
  certain files.
• 142991   SPEED: With particular files hovering the cursor over the edge of a slab the
  status of the cursor would change very slowly and the pet palette would
  appear with delay.
• 144771   TEAMWORK: Deprecated image warning could come up regularly, even though there were no deprecated images in the project.
• 133631   TEAMWORK/LIBRARY: After a library element was modified on the BIM Server its 3D look
  would be refreshed in ArchiCAD only after refreshing the Library Manager
   dialog or if the instance of the library element had been modified.
• 144203   TEAMWORK/LIBRARY: If a library had been uploaded to a BIM Server from a mapped network
  drive in a previous version of ArchiCAD then it could not be refreshed
  in the current one.
• 144761   WORK ENVIRONMENT: Quick Layers command was erroneously translated to German in the GER ArchiCAD version in the Work Environment.

Bugs fixed in optional Graphisoft components:

• 144572   BIMx: After exporting a particular file to BIMx the application closed at once.
• 145242   BIMx: Bimx could crash with particular project after activating the Info tool or turning on Outlines.
• 143452   BIMx: Improved image quality on HiDPI displays.
• 142425   BIMx: There was no possibility to accelerate the navigation along the z axis.

Download this Hotfixfor all languages except for RUS language version

• Windows 32-bit (all languages except for RUS) 
• Windows 64-bit (all languages except for RUS) 
• Mac (all languages except for RUS)

only for RUS language version,The ArchiCAD 16 Hotfix 2 (3270) installer files for the Russian language version are available through the links below. These files
contain a fix, which makes the new "Limit navigation to gallery views"
feature of BIMx Desktop Viewer available in the Russian language version
 as well.

• Windows 32-bit (only for RUS language version) 
• Windows 64-bit (only for RUS language version) 
• Mac (only for RUS language version)

[GAG]

ArchiCAD 16 Hotfix 3 (Build 3482)

Исправлено   
   
   
   

• 141655   ADD-IN: MEP Export to ArchiCAD Add-In could give "Origin is inaccessible" error.
• 146471   ADD-IN: MEP Export to ArchiCAD Add-In could give "Unable to use the project position's transform to calculate point" error.
• 146370   ADD-ON: Accessories add-on only worked properly on story 0.
• 148558   CRASH: ArchiCAD could crash on startup if DisplayOptionPreferences.xml contained incorrect parameter.
• 127423   CRASH: ArchiCAD could crash when changing the output format of a publisher set.
• 140099   CRASH: crash may occur when selecting/editing objects created by third party API Add-Ons
• 145955   CRASH: Intermittently, when migrating projects containing Hotlinks from ArchiCAD 15 to 16
• 145874   CRASH: Publishing layouts with embedded 3D content into PDF could crash in certain cases.
• 139228   CRASH: Roofs with special geometry could cause crash if the plan was migrated to ArchiCAD 16.
• 145750   CRASH: Saving a specific plan into IFC caused crash.
• 149594   CRASH: Saving IFC with enabled Bounding Box option could cause crash.
• 146818   DOCUMENT: All layers could be changed to complex profile editor layers after a crash.
• 131933   DOCUMENT: Display order could differ on floor plan and on layout.
• 147691   DOCUMENT: Doors could be misplaced in mirrored Curtain Wall.
• 145594   DOCUMENT: Elements were visible on Interior Elevation outside of its horizontal range.
• 147892   DOCUMENT: Header of element schedule was not editable.
• 143444   DOCUMENT: If project is located far from the origin, 3D Views saved using the marquee tool might appear empty
• 146691   DOCUMENT: In schedules the door and window sill/header values are always listed
  relative to wall base, and not the selected anchor point.
• 147597   DOCUMENT: Incorrect display of dotted lines if 2D antialiasing is turned off.
• 145593   DOCUMENT: Interior Elevation Marker rotates when limit line is extended
• 147166   DOCUMENT: Level and elevation dimensions were not refreshed after changing altitude.
• 147519   DOCUMENT: Migrating old plans could result in overridden elements in the default renovation filter of the AUS version.
• 147801   DOCUMENT: Model View Options had no effect on the display of door, window objects on the layout if they did not have 2D script.
• 144869   DOCUMENT: Position of mirrored auto text could differ on floor plan and on layout.
• 144783   DOCUMENT: Show function did not work for Sun Study.
• 142112   DOCUMENT: Text could become white while zooming.
• 146209   DOCUMENT: Under special circumstances Grid System can be lost from project after manipulating Section settings
• 146152   EDIT: Adding new node to a Mesh could change the height of the whole element.
• 124932   EDIT: Cursor Snap Variants were not available from toolbar.
• 141137   EDIT: Quick Selection was not available in Internal Engine, Hidden Line mode.
• 147282   EDIT: Select on Floor Plan command did not work on certain elements in Element Lists.
• 147827   EDIT: Selection could switch to the adjacent element when starting to edit a
  polygonal element (e.g. Fill, Slab, Zone) that is placed right next to
  an other.
• 144944   EDIT: Splitted Morph had incorrect display on Section/Elevation.
• 127184   EDIT: Structural function, Position and Element Classification were not stored in Favorites
• 120195   EDIT: Unlock All command did not work on MEP elements if the add-on was missing.
• 145478   EDIT: Wall could disappear when adjusted in 3D with Surface Snap.
• 148856   EDIT: Wall cut could be incorrect in curved walls.
• 148207   EDIT: Zone data could grow causing performance problems.
• 145741   FILE/DWG/IMPORT: Multi-insertion with "0" value in the DWG resulted in missing elements.
• 147844   FILE/DWG: Openings could be misplaced in a 3D DWG.
• 132231   FILE/IFC:       
  • Export: Doors now can have a 2D symbol when exported from ArchiCAD via IFC if EnableDoorWindow2DHandling registry key is created and the value is set to 1 on Windows and TRUE on Mac. To activate this key, a registry (PC) or Preferences (Mac) modification should be applied:           
  • Start ArchiCAD. Go to the File / File Special / IFC 2x3 / IFC Translation Setup menu item. Press the "Save Settings and Close" button. As a result in the registry (PC) or Preferences (Mac) a folder called IFC will be created under the main folder of the ArchiCAD 16 version.
  • One has to go to the the Registry Editor on Windows or open the Preferences on MAC as advised here: http://www.archicadwiki.com/RegistryOrPreferences.
  • Users have to create a key called EnableDoorWindow2DHandling under the IFC folder.
  • On Windows the key should be a DWORD type and its value should to be set to 1, on Mac it should be a Boolean type and its value should be TRUE.
  • Save the Preferences file on Mac, close the Registry Editor on Windows.
                          Users can disable the importing 2D symbols into Revit if ArchiCAD Connection for Revit 2013 Add-in is applied and EnableDoorWindow2DHandling registry key was created with FALSE/0 value in the Improved IFC Export registry folder. The folder is created at the first time when we export IFC file from Revit with the Add-in.                       
  • Please note that in case of Doors placed in Walls with Complex Profiles the
    opening lines will not be transferred to Revit due to a Revit bug that
    our Add-in cannot solve. If reveal is applied to the doors, the wall
    display might be incorrect when we open the IFC file in Revit. If we
    save BREP data, then it might appear faulty in Revit, because the BREP
    data is replaced in Revit during the opening process.
  • See details:132231 IFC Export/Import Notes
             
  • Import: Doors now have 2D symbol when exported from Revit and opened in ArchiCAD.
         

   
    2D symbol data can exchange within a IFC file if the user export the IFC
file with ArchiCAD Connection for Revit 2013 Add-in and the EnableDoorWindow2DHandling registry key value is TRUE/1 in the Improved IFC Export registry folder.
    Download ArchiCAD Connection for Revit 2013 Add-In
   
   

• 148146   FILE/IFC/EXPORT/CRASH: ArchiCAD crashed very frequently while exporting particular IFC files
• 146291   FILE/IFC/EXPORT: Exporting chained beams with "precise geometry - BREP" option saves
  some of the connected beams with extruded (not BREP) geometry.
• 146511   FILE/IFC/EXPORT: Improved BREP to extruded geometry conversion in case of curtain wall frames.
• 147594   FILE/IFC/EXPORT: Incorrect opening at certain third-party windows.
• 147768   FILE/IFC/EXPORT: When you save a file as IFC, the glob context was always 0.
• 149545   FILE/IFC/EXPORT: Incorrect export of windows with particular shading devices.
• 144772   FILE/IFC/IMPORT: when importing doors and windows through IFC, in specific cases the
  wall hole of the opeining is incorrect and does not match the frame of
  the opening
• 145507    FILE/IFC/IMPORT: Hotlinked IFC elements with custom profiles could be misplaced in the host file because of attribute
   name collision. We have created a registry option to embed these
  profiles in the elements as special Custom profile instead of editable
  profile attribute. For this registry (PC) or Preferences (Mac) option to
   be set please do take the following steps:
         
• Start ArchiCAD. Go to the File / File Special / IFC 2x3 / IFC Translation Setup menu item. Press the Save Settings and Close button. As a result in the registry (PC) or Preferences (Mac) a folder called IFC will be created under the main folder of the ArchiCAD 15 or 16 version.

           

• One has to go to the the Registry Editor on Windows or open the Preferences on MAC as advised here: http://www.archicadwiki.com/RegistryOrPreferences.
• Users have to create a key called ImportUnnamedProfilesAsCustom under the IFC folder.
• On Windows the key should be a DWORD type and its value has to be set to 1, on Mac it should be a Boolean type and its value has to be TRUE.
• Save the Preferences file on Mac, close the Registry Editor on Windows.
              Note: Users can later capture and duplicate these custom
  profiles using the "Capture element's profile..." option in the Profile
  Manager.

            [/size]                 

• 146570   FILE/IFC/IMPORT: When importing IFC file there is now an option to create resulting
  library parts in a linked library instead of the embedded library. Note:
   To activate this option, a registry (PC) or Preferences (Mac) option
  needs to be set:
              Please note that this option is not available with TW projects.
             
• Start ArchiCAD. Go to the File / File Special / IFC 2x3 / IFC Translation Setup menu item. Press the Save Settings and Close button. As a result in the registry (PC) or Preferences (Mac) a folder called IFC will be created under the main folder of the ArchiCAD 16 version.
• One has to go to the the Registry Editor on Windows or open the Preferences on MAC as advised here: http://www.archicadwiki.com/RegistryOrPreferences.
• Users have to create a key called EnableLinkedLibrary under the IFC folder.
• On Windows the key should be a DWORD type and its value has to be set to 1, on Mac it should be a Boolean type and its value has to be TRUE.
• Save the Preferences file on Mac, close the Registry Editor on Windows.
• Before a new importing process make sure that your IFC files are placed into the
  particular folder where the new library folder structure is needed.
• 147576   FILE/IFC/IMPORT: Windows could be imported with incorrect elevation from Allplan.
• 149325   GDL: The WIDO_REVEAL_SIDE value was not available to the Interface.
• 147915   GDL: using the text I/O add-on, changes to the text file's content is not picked up by the objects after refreshing library
• 140630   INTERIOR ELEVATION: Missing slab and wall edges.
• 149107   MODEL/SPEED: Trace And Reference made 2D slow
• 148823   MODEL: Custom windows could seem to be missing in migrated plans.
• 143130   MODEL: In particular circumstances in the Navigator Project Map some floors
  show up multiple times, or with wrong floor number (while in the Story
  Settings dialog everything is OK)
• 143629   SPEED: Generating elevation was slow if walls had many hotspots.
• 144911   SPEED: Trace Reference could cause speed issues with certain 3D engine settings. http://archicadwiki.com/Troubleshooting/SlowTraceReference
• 150318   SPEED: Performance of ArchiCAD and other programs running in OS X could degrade with time of use due to a memory leak.
• 146877   TEAMWORK/CRASH: Crash could occur when releasing Scheme Settings after certain modifications.
• 146072   TEAMWORK/DOCUMENT: Dimension texts were missing until zooming in from independent sections after sharing the project.
• 145564   TEAMWORK/SPEED: Loading of BIM Server Libraries was much slower than linked Libraries, due to checking of locked library parts.
• 142394   TEAMWORK: Custom model view options under certain circumstances incorrectly handled reservation information.
• 140083   TEAMWORK: New category with custom name cannot be created in the BIM Server Manager.
• 149416   TEAMWORK: Restore All Interior Elevations in Group worked without Reservation.
• 147806   TEAMWORK: The BIM Server regularly requested PLN backup even though PLN project
  backup function was disabled for that particuar project by the users.
  The PLN backups were not created afterwards.
• 147948   VIEW: 3D Perspective view could not display the model in certain cases, only axonometric view worked.
• 150561   VIEW: 2D representation of wrapped columns could have been wrong with composite walls.

            Bugs fixed in optional Graphisoft components:           
           
           

• 149454   BIMX: Floor plan was missing in some cases.

           
           

Скачать                       
           

• Windows 32-bit
• Windows 64-bit
• Mac

[/i]

[GAG]

ArchiCAD 16 Hotfix 3 (Build 3487)

Исправлено  

List of bugs fixed in this Hotfix:

• 141655   ADD-IN: MEP Export to ArchiCAD Add-In could give "Origin is inaccessible" error.
• 146471   ADD-IN: MEP Export to ArchiCAD Add-In could give "Unable to use the project position's transform to calculate point" error.
• 146370   ADD-ON: Accessories add-on only worked properly on story 0.
• 148558   CRASH: ArchiCAD could crash on startup if DisplayOptionPreferences.xml contained incorrect parameter.
• 127423   CRASH: ArchiCAD could crash when changing the output format of a publisher set.
• 140099   CRASH: crash may occur when selecting/editing objects created by third party API Add-Ons
• 145955   CRASH: Intermittently, when migrating projects containing Hotlinks from ArchiCAD 15 to 16
• 145874   CRASH: Publishing layouts with embedded 3D content into PDF could crash in certain cases.
• 139228   CRASH: Roofs with special geometry could cause crash if the plan was migrated to ArchiCAD 16.
• 145750   CRASH: Saving a specific plan into IFC caused crash.
• 149594   CRASH: Saving IFC with enabled Bounding Box option could cause crash.
• 146818   DOCUMENT: All layers could be changed to complex profile editor layers after a crash.
• 131933   DOCUMENT: Display order could differ on floor plan and on layout.
• 147691   DOCUMENT: Doors could be misplaced in mirrored Curtain Wall.
• 145594   DOCUMENT: Elements were visible on Interior Elevation outside of its horizontal range.
• 147892   DOCUMENT: Header of element schedule was not editable.
• 143444   DOCUMENT: If project is located far from the origin, 3D Views saved using the marquee tool might appear empty
• 146691   DOCUMENT: In schedules the door and window sill/header values are always listed
  relative to wall base, and not the selected anchor point.
• 147597   DOCUMENT: Incorrect display of dotted lines if 2D antialiasing is turned off.
• 145593   DOCUMENT: Interior Elevation Marker rotates when limit line is extended
• 147166   DOCUMENT: Level and elevation dimensions were not refreshed after changing altitude.
• 147519   DOCUMENT: Migrating old plans could result in overridden elements in the default renovation filter of the AUS version.
• 147801   DOCUMENT: Model View Options had no effect on the display of door, window objects on the layout if they did not have 2D script.
• 144869   DOCUMENT: Position of mirrored auto text could differ on floor plan and on layout.
• 144783   DOCUMENT: Show function did not work for Sun Study.
• 142112   DOCUMENT: Text could become white while zooming.
• 146209   DOCUMENT: Under special circumstances Grid System can be lost from project after manipulating Section settings
• 146152   EDIT: Adding new node to a Mesh could change the height of the whole element.
• 124932   EDIT: Cursor Snap Variants were not available from toolbar.
• 141137   EDIT: Quick Selection was not available in Internal Engine, Hidden Line mode.
• 147282   EDIT: Select on Floor Plan command did not work on certain elements in Element Lists.
• 147827   EDIT: Selection could switch to the adjacent element when starting to edit a
  polygonal element (e.g. Fill, Slab, Zone) that is placed right next to
  an other.
• 144944   EDIT: Splitted Morph had incorrect display on Section/Elevation.
• 127184   EDIT: Structural function, Position and Element Classification were not stored in Favorites
• 120195   EDIT: Unlock All command did not work on MEP elements if the add-on was missing.
• 145478   EDIT: Wall could disappear when adjusted in 3D with Surface Snap.
• 148856   EDIT: Wall cut could be incorrect in curved walls.
• 148207   EDIT: Zone data could grow causing performance problems.
• 145741   FILE/DWG/IMPORT: Multi-insertion with "0" value in the DWG resulted in missing elements.
• 147844   FILE/DWG: Openings could be misplaced in a 3D DWG.
• 132231   FILE/IFC:    
  • Export: Doors now can have a 2D symbol when exported from ArchiCAD via IFC if EnableDoorWindow2DHandling registry key is created and the value is set to 1 on Windows and TRUE on Mac. To activate this key, a registry (PC) or Preferences (Mac) modification should be applied:        
  • Start ArchiCAD. Go to the File / File Special / IFC 2x3 / IFC Translation Setup menu item. Press the "Save Settings and Close" button. As a result in the registry (PC) or Preferences (Mac) a folder called IFC will be created under the main folder of the ArchiCAD 16 version.
  • One has to go to the the Registry Editor on Windows or open the Preferences on MAC as advised here: http://www.archicadwiki.com/RegistryOrPreferences.
  • Users have to create a key called EnableDoorWindow2DHandling under the IFC folder.
  • On Windows the key should be a DWORD type and its value should to be set to 1, on Mac it should be a Boolean type and its value should be TRUE.
  • Save the Preferences file on Mac, close the Registry Editor on Windows.
                 Users can disable the importing 2D symbols into Revit if ArchiCAD Connection for Revit 2013 Add-in is applied and EnableDoorWindow2DHandling registry key was created with FALSE/0 value in the Improved IFC Export registry folder. The folder is created at the first time when we export IFC file from Revit with the Add-in.                
  • Please note that in case of Doors placed in Walls with Complex Profiles the opening
    lines will not be transferred to Revit due to a Revit bug that our
    Add-in cannot solve. If reveal is applied to the doors, the wall display
     might be incorrect when we open the IFC file in Revit. If we save BREP
    data, then it might appear faulty in Revit, because the BREP data is
    replaced in Revit during the opening process.
  • See details:132231 IFC Export/Import Notes
         
  • Import: Doors now have 2D symbol when exported from Revit and opened in ArchiCAD.
     

2D symbol data can exchange within a IFC file if the user export the IFC
file with ArchiCAD Connection for Revit 2013 Add-in and the EnableDoorWindow2DHandling registry key value is TRUE/1 in the Improved IFC Export registry folder.
Download ArchiCAD Connection for Revit 2013 Add-In

• 148146   FILE/IFC/EXPORT/CRASH: ArchiCAD crashed very frequently while exporting particular IFC files
• 146291   FILE/IFC/EXPORT: Exporting chained beams with "precise geometry - BREP" option saves
  some of the connected beams with extruded (not BREP) geometry.
• 146511   FILE/IFC/EXPORT: Improved BREP to extruded geometry conversion in case of curtain wall frames.
• 147594   FILE/IFC/EXPORT: Incorrect opening at certain third-party windows.
• 147768   FILE/IFC/EXPORT: When you saved a file as IFC, the glob context was always 0.
• 149545   FILE/IFC/EXPORT: Incorrect export of windows with particular shading devices.
• 144772   FILE/IFC/IMPORT: when importing doors and windows through IFC, in specific cases the
  wall hole of the opeining is incorrect and does not match the frame of
  the opening
• 145507    FILE/IFC/IMPORT: Hotlinked IFC elements with custom profiles could be misplaced in the host file because of attribute name
  collision. We have created a registry option to embed these profiles in
  the elements as special Custom profile instead of editable profile
  attribute. For this registry (PC) or Preferences (Mac) option to be set
  please do take the following steps:
      
• Start ArchiCAD. Go to the File / File Special / IFC 2x3 / IFC Translation Setup menu item. Press the Save Settings and Close button. As a result in the registry (PC) or Preferences (Mac) a folder called IFC will be created under the main folder of the ArchiCAD 15 or 16 version.

       

• One has to go to the the Registry Editor on Windows or open the Preferences on MAC as advised here: http://www.archicadwiki.com/RegistryOrPreferences.
• Users have to create a key called ImportUnnamedProfilesAsCustom under the IFC folder.
• On Windows the key should be a DWORD type and its value has to be set to 1, on Mac it should be a Boolean type and its value has to be TRUE.
• Save the Preferences file on Mac, close the Registry Editor on Windows.
          Note: Users can later capture and duplicate these custom
  profiles using the "Capture element's profile..." option in the Profile
  Manager.

       [/size]            

• 146570   FILE/IFC/IMPORT: When importing IFC file there is now an option to create resulting
  library parts in a linked library instead of the embedded library. Note:
   To activate this option, a registry (PC) or Preferences (Mac) option
  needs to be set:
          Please note that this option is not available with TW projects.
          
• Start ArchiCAD. Go to the File / File Special / IFC 2x3 / IFC Translation Setup menu item. Press the Save Settings and Close button. As a result in the registry (PC) or Preferences (Mac) a folder called IFC will be created under the main folder of the ArchiCAD 16 version.
• One has to go to the the Registry Editor on Windows or open the Preferences on MAC as advised here: http://www.archicadwiki.com/RegistryOrPreferences.
• Users have to create a key called EnableLinkedLibrary under the IFC folder.
• On Windows the key should be a DWORD type and its value has to be set to 1, on Mac it should be a Boolean type and its value has to be TRUE.
• Save the Preferences file on Mac, close the Registry Editor on Windows.
• Before a new importing process make sure that your IFC files are placed into the particular
  folder where the new library folder structure is needed.
• 147576   FILE/IFC/IMPORT: Windows could be imported with incorrect elevation from Allplan.
• 149325   GDL: The WIDO_REVEAL_SIDE value was not available to the Interface.
• 147915   GDL: objects using the "Text I/O" add-on did not update after the text file
  changed. After this fix such objects can be forced to reload the text
  file with the "Rebuild & Regenerate" command. (To activate Rebuild
  & Regenerate command, hold down the ALT key (PC) or SHIFT (Mac)
  while using the View/Refresh/Rebuild command)
• 140630   INTERIOR ELEVATION: Missing slab and wall edges.
• 149107   MODEL/SPEED: Trace And Reference made 2D slow
• 148823   MODEL: Custom windows could seem to be missing in migrated plans.
• 143130   MODEL: In particular circumstances in the Navigator Project Map some floors
  show up multiple times, or with wrong floor number (while in the Story
  Settings dialog everything is OK)
• 143629   SPEED: Generating elevation was slow if walls had many hotspots.
• 144911   SPEED: Trace Reference could cause speed issues with certain 3D engine settings. http://archicadwiki.com/Troubleshooting/SlowTraceReference
• 150318   SPEED: Performance of ArchiCAD and other programs running in OS X could degrade with time of use due to a memory leak.
• 146877   TEAMWORK/CRASH: Crash could occur when releasing Scheme Settings after certain modifications.
• 146072   TEAMWORK/DOCUMENT: Dimension texts were missing until zooming in from independent sections after sharing the project.
• 145564   TEAMWORK/SPEED: Loading of BIM Server Libraries was much slower than linked Libraries, due to checking of locked library parts.
• 142394   TEAMWORK: Custom model view options under certain circumstances incorrectly handled reservation information.
• 140083   TEAMWORK: New category with custom name could not be created in the BIM Server Manager.
• 149416   TEAMWORK: Restore All Interior Elevations in Group worked without Reservation.
• 147806   TEAMWORK: The BIM Server regularly requested PLN backup even though PLN project
  backup function was disabled for that particuar project by the users.
  The PLN backups were not created afterwards.
• 147948   VIEW: 3D Perspective view could not display the model in certain cases, only axonometric view worked.
• 150561   VIEW: 2D representation of wrapped columns could have been wrong with composite walls.

       Bugs fixed in optional Graphisoft components:                        

• 149454   BIMX: Floor plan was missing in some cases.

Скачать данное обновление

• Windows 32-bit
• Windows 64-bit
• Mac

Предыдущие обновления

• Hotfix build 3270
• Hotfix build 3014

[GAG]

ArchiCAD 16 Hotfix 4 (Build 3827)

Скачать обновление №4 (3827)

• Windows 32-bit
• Windows 64-bit
• Mac

Список изменений и исправлений:

• 157126 API: could no longer reserve another element as part of a reservation event/edit action
• 146731 CODEMETER: License borrowing was disabled due to a problem caused by first time borrowing in a new version of ArchiCAD.
• 144226 CRASH: ArchiCAD could crash after a "Do_VBEExport, !InitCore" error message because of the roaming profile handling of
  BIMx.
• 153498 CRASH: ArchiCAD crashed when the project contained specific Solid Element Operations.
• 138230 CRASH: Crash could happen in the 3D window on Macs with Intel HD 3000 video card if OpenGL engine was used.
• 129194 CRASH: Crash could happen while checking drawing setting of an elevation that would not place.
• 131486 CRASH: Editing window schedule fields could cause crash in ArchiCAD.
• 150008 CRASH: Invalid Shell element could result in crash during the start of ArchiCAD.
• 149673, 132235 CRASH: Updating schedule drawing on layout could cause crash in ArchiCAD.
• 144113 DATA LOSS: In certain cases invalid elements that were reported as “successfully fixed” by ArchiCAD were not.
• 152676 DOCUMENT: Content of a 3D Document that was saved from Marquee selection could be lost after re-opening the plan.
• 151748 DOCUMENT: Dimensions in drawings could extend beyond their actual placement.
• 149167 DOCUMENT: In Document Options dialog the Fit to Screen option could produce wrong scale with Rotated Orientation.
• 132324 DOCUMENT: In drawing manager "Not read yet" status could appear after drawings had been relinked.
• 152602 DOCUMENT: In GER Version part of the zone geometry with lower than 0.01 m2, area doesn't appear in the Flaechenbereichnung list.
• 152078 DOCUMENT: Incorrect Label default setting: GLOB_ELEM_TYPE parameter value was 1 instead of 0 in ArchiCAD 16.
• 130450 DOCUMENT: Marquee area could not be printed correctly on MAC from rotated view.
• 143282 DOCUMENT: Print Marquee Area printed wrong area if used with rotated views.
• 130423 DOCUMENT: Saving a region defined by Marquee to PDF was wrong if rotated orientation was used.
• 152169 DOCUMENT: Story elevation markers could show wrong information until manually refreshed.
• 151975 DOCUMENT: Story Level Markers could revert to subtype default if the section/elevation was rebuilt while the marker object was
   missing.
• 152441 DOCUMENT: Updating with IFC Model could cause that the Interior Elevations to lose  their content.
• 126395 DOCUMENT: Wrong scale value could appear near the Fit to page check box.
• 159140 DOCUMENT: Zone Category is visible in 2D but cannot be listed in Schedule.
• 132234 DOCUMENT: Zone relations of doors were not scheduled properly in case of walls with custom profile.
• 129776 DOCUMENT: Zoom settings were not stored for views within a cloned folder.
• 153744 DOCUMENT/CRASH: ArchiCAD could crash when updating the layouts.
• 142119 EDIT: After converting Mesh to Morph texture alignment went wrong and couldn't be aligned again .
• 156144 EDIT: Changing Pen Set on a Layout only took effect after Rebuild and Regenerate
• 146004 EDIT: Cumulative Distance on Section was extended with the current story height.
• 140851 EDIT: Cutting a hole into a mesh could mix up the heights of the remaining mesh points.
• 129396 EDIT: Dimension placement in direction of slanted guideline was not possible.
• 146192 EDIT: Drawing Tool could not be panned or dragged with marquee on Floor plan.
• 129431 EDIT: Entering a value into the tracker with the Offset Edge command on a Roof resulted in a much smaller offset.
• 152502 EDIT: Entering the size of Roof Accessories objects and AUS Essential Libraries in the Object Selection Settings dialog produced
   unpredictable element sizes.
• 125418 EDIT: Feedback when stretching a Zone vertically in the 3D window could be incorrect in some cases.
• 150537 EDIT: Find and Replace did not work in GDL editing windows.
• 144521 EDIT: In ArchiCAD 16 vertical Grid tool's large area of the vertical grid lines were not displayed.
• 152306 EDIT: In AUS version beams uncut line became solid after copy-paste.
• 128472 EDIT: In Section/Elevation Offset command for extruded shells was moving the contour lines in wrong direction.
• 121664 EDIT: On Layouts in Drawings originating from Worksheets the scale of fill could change after moving one node of the frame
  polygon.
• 132464 EDIT: On Elevation if the Uncut Element were set to Non Shaded the shadow fill was overwritten with the Renovation Status of the
   Element where the shadow was projected.
• 126417 EDIT: Renovation override of columns were lost when stretching or elevating them to stick into the story above their home
  story.
• 137722 EDIT: Switching between the Active view and the Trace reference view could cause a third View to be displayed as Trace
  reference.
• 129198 EDIT: Visual feedback was gone after using the horizontal scroll feature of Logitech mice.
• 144522 EDIT: When Bulge command was used on Morph elements the segmentation of the feedback was different from the result if the plan
  was far from origin.
• 144734 EDIT: When right clicking on a surface of an element to bring up the context menu the selection could switch to that element.
• 144320 EDIT: when Rotated View is used on floor plan any image we place with Figure Tool with any anchor point except lower left will
  be incorrectly positioned.
• 128825 EDIT: With multiple elements selected Show On Renovation Filter status could incorrectly be changed for some elements.
• 140947 EDIT/CRASH: ArchiCAD could crash when moving a drawing from one layout to another in some cases.
• 151955 EDIT/CRASH: ArchiCAD crashed when a placed elevation line had a 0 length part.
• 149287 EDIT/HOTLINK: Some changes in morph geometry were not transferred in to the host file.
• 150954 ENERGY EVALUATION: Fill of CW panels and frames could get mixed up in the Energy Model Review Structures dialog.
• 155759 FILE/3DS/EXPORT: Elements could be exported with incorrect coordinates.
• 148592 FILE/DWG/EXPORT: Cannot write output file error message appears if layout name contains ";" character.
• 152754 FILE/DWG/EXPORT: Dimension texts moved to custom location did not keep their position when the plan was saved as DWG.
• 149025 FILE/DWG/EXPORT: Exporting DWG from SWE version with a particular translator resulted in wrong line type scale in AutoCAD.
• 150729 FILE/DWG/EXPORT: DWG exported from ArchiCAD  incorrectly displayed dimension lines in AutoCAD.
• 152299 FILE/DWG/EXPORT: Objects using File operations were incorrectly exported to DWG.
• 158312 FILE/DWG/EXPORT: Template file was not taken into account.
• 149939 FILE/DWG/EXPORT: Using a DWG file as a template during the export could result in "Cannot write output file" error message.
• 146951 FILE/DWG/IMPORT/CRASH: Opening particular DWG files could cause crash.
• 143503 FILE/DWG/IMPORT: DWG file merged as a file or opened as an object in JPN version had wrong parameters.
• 150317, 153277 FILE/DWG/IMPORT: Fills could be missing because of incorrect conversion when importing DWG file.
• 148850 FILE/EPX/EXPORT: The saved Piranesi file was faulty.
• 154198 FILE/IFC/EXPORT: ArchiCAD exported wrong default value for Project North
• 151526, 152341 FILE/IFC/EXPORT: Coordinates will be exported with up to 12 digits resulting in more accurate building placement in
  case of models far from the origin.
• 136777 FILE/IFC/EXPORT: Direction of door opening symbols could be wrong in Solibri after exporting from ArchiCAD NED version.
• 149290 FILE/IFC/EXPORT: Even though Frame Cut Fills and Panel Cut Fills values were set in the CW Settigs dialog, IFC Materials were
  not exported to IFC for the IfcMember and IfcPlate elements.
• 158040 FILE/IFC/EXPORT: IFC export failed if the project contained profile walls missing the profile attribute.
• 159072 FILE/IFC/EXPORT: Space containment data were not exported into IFC.
• 155147 FILE/IFC/EXPORT: Texts with national characters were exported incorrectly into .ifcxml files
• 141546 FILE/IFC/EXPORT: Zones on hidden layers could be exported if Space Containment translator option was enabled.
• 151273 FILE/IFC/EXPORT: Zones trimmed to Roof/Shell were exported with incorrect geometry.
• 159199 FILE/IFC/IMPORT: IFC import of IFC Container elements were not correctly registered which in some cases could lead to TW
  errors.
• 154305 FILE/IFC/IMPORT: Certain imported IFC models with BREP geometry did not show up in ArchiCAD
• 154242 FILE/IFC/IMPORT: Openings disappeared after opening a particular IFC file exported from Nemetschek Allplan.
• 147343 FILE/IFC/IMPORT: Particular IFC files were opened in ArchiCAD with missing openings.
• 149819 FILE/IFC/IMPORT: Warning message will be displayed when imported elements are hidden on the current Renovation Filter.
• 152998 FILE/IFC/SAVE/CRASH: Importing IFC file containing Wall with revolved geometry but without an axis crashed ArchiCAD.
• 149797 FILE/IFC: Editing IFC Conversion XML caused apparent freeze if typical IFC library was linked to the project.
• 153775 FILE/IFC: Site Geometry became misplaced if there was a site offset different from 0 set.
• 137658 FILE/OPEN/CRASH: ArchiCAD crashed at opening a particular file because of a special polygonal wall in the plan.
• 146239 FILE/OPEN: Certain files opened slower in ArchiCAD 16 than in ArchiCAD 15.
• 138506 FILE/PDF/EXPORT: After saving a PDF from a specific file the existing wall part was merged with the demolished wall part causing
  their fills to become similar.
• 150513 FILE/SAVE: ArchiCAD might have crashed if certain projects were saved back to older file format.
• 149900 FILE/SAVE: On MAC OS 10.8 ArchiCAD could not save a file into a folder that was open in a Finder window.
• 150924 GDL: GDL requests didn't always work using APIAny_ChangeAParameter.
• 153687 GDL: REQUEST ("Name_of_plan", "", name_of_plan) failed to be listed in schedule.
• 150425 HOTLINK: Particular files could give internal error if they contained hotlinks.
• 152523 EDIT/HOTLINK/CRASH: ArchiCAD could crash when relocating all Hotlink module files at once.
• 148561 IFC: Editing a particular IFC Conversion XML could cause crash.
• 151481 IFC: 'Highlighted'-type (new version element) Zones were not colored in Mark-Up tool after using Detect IFC Model Changes.
• 152851 INSTALL: Java 6 is now present in the hotfix installer and will install automatically if necessary prior to patching ArchiCAD
  on Windows platforms.
• 152853 MODEL: Anti-aliasing has been disabled for NVIDIA GeForce GT 650M Graphics cards on Mac to prevent unexpected termination of
  ArchiCAD.
• 143130 MODEL: In particular circumstances in the Navigator Project Map some floors show up multiple times, or with wrong floor
  number (while in the Story Settings dialog everything is OK).
• 153298 MODEL: Label update on walls didn't call the parameter script, thus did not always update wall parameter info.
• 152850 MODEL: Model could disappear in 3D after changing to parallel view.
• 153260 MODEL: Zone's contour line could disappear if the General Material was used as the Zone's cover fill.
• 158973 receiving changes could result in a Receive Error with certain projects that had hotlinked modules
• 152765 SPEED: Attribute Manager stopped collecting the attributes when ArchiCAD was in background.
• 152371 SPEED: Element selection, panning, zooming were slow if objects used text File operations.
• 148954 SPEED: Migrated Work Environment could cause freeze in ArchiCAD.
• 148634 SPEED: Multiple selections in 3D window could be slow in projects containing many polygons.
• 157623 TEAMWORK, HOTLINK: Stop button has been removed from the progress windows of the Send, Receive and Teamwork Hotlink Update
  processes to guarantee consistent state of Projects.
• 152593 TEAMWORK/CRASH: BIM Server could crash if more than 7 users start library action in the same library at the same time.
• 139979 TEAMWORK/CRASH: Crash could happen after pressing OK to a warning message saying that hotlink is missing or server went offline.
• 152937 TEAMWORK/CRASH: Crash could occur when receiving changes from the BIM Server because of inconsistency between server and local
  data.
• 149187 TEAMWORK/CRASH: If two users import the same schedule .xml at the same time ArchiCAD could crash.
• 152880 TEAMWORK/CRASH: Saving Teamwork project as PLN in some cases could result in damaged plan that crashes at open.
• 154426 TEAMWORK/DATA LOSS: A possible occurrence of  hotlink/xref cache synchronization was eliminated.
• 149911 TEAMWORK/DOCUMENT: Modification of publisher set path was not sent to the server even though the user reserved the settings.
• 151943 TEAMWORK/DOCUMENT: Read from function of Drawing Manager was misleading in case of Teamwork. It will be disabled.
• 153722 TEAMWORK/EDIT: Changing finish/core settings was possible without reserving the Composite Structures dialog resulting in teamwork
   users not sharing the same structures.
• 150125 TEAMWORK/EDIT: Wallhole saved from Slab then used in a Hotlink module could result in Server Returns Error Code error in the
  host project.
• 143819 TEAMWORK/HOTLINK: Teamworked hotlinks with SEOs that were broken could result in Server Returns Error Code problems.
• 158183 TEAMWORK/SPEED: Large teamwork library performance has been improved.
• 155084 TEAMWORK/SPEED: Refreshing or removing LCF library could result in ArchiCAD becoming Not Responding.
• 153160 TEAMWORK/SPEED: Switching between GSM editing windows (eg. Master and 2D script) could be slow if the library part was located
   in a BIM Server library.
• 155282 TEAMWORK: "Server Returns Error Code; Failed to update object: ..." message could come up after reserving some elements,
  cancelling operation, trying to reserve elements again
• 157448 TEAMWORK: Certain teamwork anomalous receive data can now be automatically cleaned preventing need of re-sharing or lost work
• 146497 TEAMWORK: High priority messages disappeared from the screen in a short time.
• 153379 TEAMWORK: Inconsistency between local and server database could be created by moving Publisher Sets between My Sets and Public
  Sets. Sending was not possible afterwards.
• 157209-157293 TEAMWORK: Messaging Server could stop randomly
• 157434 TEAMWORK: Teamworked hotlinks with dimensions that were broken could result in Server Returns Error Code problems.
• 107651 USER INTERFACE: 3rd instance of ArchiCAD could not be started from the File/Open/Launch a new instance of ArchiCAD command in
  some circumstances.
• 149490 VIEW: Renovation filter setting of the 3D window was not stored in the plan.

[GAG]

ArchiCAD 16 Hotfix 5 (Build 4010)

Скачать обновление №5 (4010)

• Windows 32-bit
• Windows 64-bit
• Mac

Список изменений и исправлений:

• 155118  CRASH: The routines that addressed 3D projections were made more stable.
• 156176  CRASH: Inserting new points in wall's polygon could crash ArchiCAD.
• 157462  CRASH: In particular projects, opening the project or pasting 2D elements could cause ArchiCAD to crash.
• 159613  CRASH: Both an erroneous visible ArchiCAD Layer and its resulting crash were corrected.
• 134515  DOCUMENT: Display of Beams did not reflect the position of the Floor Plan Cut Plane below and above the Home Story.
• 148211,162393  DOCUMENT: Full layouts and sections of particular projects could become rotated. You can read more about the issue here: http://www.archicadwiki.com/Troubleshooting/RotatedLayoutsSections
• 149979  DOCUMENT: Renovation filter could change in 3D upon Hotlink Update or Copy from another project.
• 152993  DOCUMENT: If view contained fill "Insulation 01" the published PDF could not be open on MAC with Adobe Reader 11.0.01 and
  above.
• 159140  DOCUMENT: Zone Category was not listed in the Schedule.
• 160332  DOCUMENT: On MAC OS platforms Energy Evaluation report could not be saved in some localized version (RUS, POL). For more
  information read this article: http://www.archicadwiki.com/Troubleshooting/WorkaroundForSavingXlsInEnergyEvaluation
• 156473  EDIT: Changing reference line segment of a Curtain Wall from straight line to arc resulted misplaced mullions.
• 160553  EDIT: Markup Style field picked up attributes unnecessarily with every copy/paste.
• 161862  EDIT: Crash could occur when adjusting Editing plane.
• 113951  FILE/DWG/EXPORT: Dimensions superscript texts got displaced in exported DWG file.
• 158352  FILE/DWG/IMPORT: Import Blocks from DXF/DWG crashed ArchiCAD.
• 151660  FILE/IFC/DATA: IFC properties of elements could get lost after converting them to Morphs.
• 160970  A user-modifiable mapping file was created contains a set of rules formatted in xml to bring data from different fields in an
  ArchiCAD project into the IFC Name Attribute field. For more information
   please read this article: http://www.archicadwiki.com/TechTips/IFCNameAttributeMapping
• 143209  FILE/IFC/EXPORT: Openings with slanted reveal might look incorrect in IFC.
• 147046  FILE/IFC/IMPORT: Wall niche became an opening when imported into ArchiCAD.
• 155347, 154042  FILE/IFC/IMPORT: If default doors/windows anchor were not set to "Sill to Wall base" then openings imported from IFC
  could get vertically displaced.
• 159286  FILE/IFC/IMPORT: ArchiCAD crashed when opening particular IFC file.
• 161453  INSTALL: Hotfixing failed if the user profile under which ArchiCAD had been installed does not exist any more.
• 162575  INSTALL: Installer could not run successfully if logged in as a Domain Administrator.
• 158077  MODEL: A tube Morph wasn't solid if the beginning and ending faces overlapped.
• 159241  SPEED: Zone schedule calculations could be slow in certain cases.
• 159753  SPEED: Drawing Manager’s “check status” updates are now faster.
• 145636  TEAMWORK: common reason for "Internal Error" during open/join of a Teamwork project was corrected.
• 157423  TEAMWORK: A Server Returns Error Code error occurred occasionally when a solid element operation was performed on a hotlinked
   wall.
• 159577  TEAMWORK/HOTLINK: Hotlink data handling in Teamwork could be confused in certain conditions by simultaneous receives from
  two or more users.  A new dialog warns users,when the conditions arise,
  that they must retry the receive command.  
• 159147  TEAMWORK/SPEED: Joining into very large Teamwork projects with many linked Hotlink Modules could be slow due to
  processing the embedded libraries of the Hotlink Modules.
• 154898  USER INTERFACE: Floor plan window's saved zoom values could not be deleted.

Исправления в опциональных компонентах:

• 156292  BIMx: On Windows  executable BIMx file  could crash with a user profile containing national characters in its name.